Uniform Construction Code

Alternative Compliance Approaches:
International Energy Conservation Code 2006

The following are alternative approaches that Labor & Industry customers may use to demonstrate compliance with the International Energy Conservation Code 2006.
  1. Software reports for the Total Building Performance Method may be used as long as:
     
    • The following mandatory sections of the International Energy Conservation Code 2006 are satisfied:

      502.4 Air Leakage
      502.5 Moisture Control
      503.2 Provisions Applicable to Mechanical Systems
      504 Service Water Heating
      505.2 Lighting Controls
      505.3 Tandem Wiring
      505.4 Exit Signs
      505.6 Exterior Lighting
      505.7 Electrical Energy Consumption
       
    • The annual energy costs projected by building performance model do not exceed those of the standard design outlined in section 506.4 of the International Energy Conservation Code 2006
       
      and,
       
    • The applicant submits a statement that the software utilized satisfies the requirements of the ANSI/ASHRAE 140-2001 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs.
  2.  
  3. Software reports for the Energy Cost Budget Method may be used to demonstrate compliance with the International Energy Conservation Code 2006 as long as:
     
    • The following mandatory sections of the ASHRAE 90.1 2004 are satisfied:

      5.4 Mandatory Provisions concerning the Building Envelope
      6.4 Mandatory Provisions concerning HVAC
      7.4 Mandatory Provisions concerning Service Hot Water
      8.4 Mandatory Provisions concerning Electrical Power
      9.4 Mandatory Provisions concerning Lighting
      10.4 Mandatory Provisions concerning Other Equipment
       
    • The design energy cost does not exceed the energy cost budget as defined in sections 11.2 and 11.3 of the ASHRAE 90.1 2004.
       
    • The efficiency level of the components specified in the building design meet or exceed the efficiency level of the components used to calculate the design energy cost.
       
      and,
       
    • The applicant submits a statement indicating that the software utilized satisfies the requirements of the ANSI/ASHRAE 140-2001 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs.
 
Copyright © 2009 Commonwealth of Pennsylvania Department of Labor & Industry All Rights Reserved
Contact UsCommonwealth PortalContact the Web Team | Privacy PolicyDisclaimer
Copyright ©  Commonwealth of Pennsylvania